NANDAN’s Telescopic Conveyor can not only be used in loading bays, shipping or dock areas but also as a conveyor based on the requirement at the hour of operation.
Nandan is a specialist in manufacturing of the telescopic conveyor which is used to load and unload trucks, 20′ or 40′ containers and large trailers. This versatile equipment designed with the ergonomics of operations in mind is a masterstroke requirement for the factories of all types which presently depend on manual labor. With the conveyor the automation can be achieved including package counting, RFID tags, barcoded dispatch, etc.
- Have a problem with loading times at your dock.?
- Have problems with the manpower required to load or unload.?
- Manually stack and unstack material from inside and into a truck?
- Ergonomics is badly affected and it leads to health problems in your work?
- Have limited space in the loading area and no dock exits?
- Forklifts can’t enter into the truck due to the poor truck strength of floor
- People get injured carrying material in and out
- Employee morale is low
Truck Loading Unloading, Areas of space restriction, Cartons, Loading & Unloading of Gunny Bags, Small and big tires, Bales of wadding, PU and PS Panels, Mattresses, Bags, Rolls of rubber, Furniture, Fast moving Consumer Goods, Loose materials
NANDAN GSE – Your partner in industrial Engineering ( Improve the EFFICIENCY of your business … Improve your PROFITS )
|Stages||Extension||Closed Length||Total Length||Rear Height||Front Height|
|Minimum Length||The closed length as marked as “A” – 4200mm|
|Maximum Length||The open length as marked as “B” – 9700mm|
|Telescopic Extension||The part that enters the truck marked as “E” – 5500mm|
|Front Max Height||Upto top of truck – typically 200mm from truck floor|
|Belt Width||600mm standard|
|Belt Type||3 ply PVC or Nylon or Rubber belt with roughtop design|
|Belt Direction||Forward and Reverse i.e. Bidirectional|
|Belt Drive||Motorized Pulley (integrated) of Rulmeca make of 3 kW|
|Belt drive speed||Adjustable from 5m per min to 40m per minute in both direction using heavy duty drive of Mitsubishi make|
|Powe Supply||3 Phase 440V, 60 Hz x HP connected|
|Capacity||Standard 50 kg/m distributed load. Single load of 200 kg can be loaded|
|Control panel||IP 65 standard mounted by standard on the left in the rear with Siemens PLC programmable|
|Installation Environment||20 to 40 deg C with Humidity 35% to 100%|
|Colour||Any shade in RAL can be painted. Preferred RAL 5055|
|Noise Level||Max 70 dB measured at 1 m away|